| 12/31/2027 | PCN-26-268325 - End of Life with Replacement. material change within the MCON 1.2 CleanBody Terminal family. The base material of the existing 0- variants will be changed from CuSn0.15 to CuSn4, resulting in the introduction of new 7- variants. This material change provides improved crimp performance, while maintaining electrical characteristics. There are no geometrical changes, and existing tooling and applicators remain fully compatible. All new versions have been fully qualified in accordance with product specification 108-18782 (including LV214 and USCAR), following TE Connectivity s standard release procedures. A phased introduction is planned, starting with lead customers and lead part numbers in EMIA in early 2026, followed by a global rollout over the subsequent time. TE Connectivity strongly recommends using the new 7-variants for all new designs and future applications, as they represent the preferred and enhanced long-term solution. The current 0-variants will remain available and fully supported during the transition period and any future changes to the availability of the 0-variants will be communicated through a separate Product Change Notification.
| Download |
| 01/16/2026 | PCN-26-268172-C - PCN cancellation. PCN 25 264941 is cancelled due to ambiguity resulting from an internal IT system issue, which caused confusion regarding the future ordering requirement for the 7- variants. Please note that the requirement for future orders to include the 7- variants is explicitly defined in the new PCN.
| Download |
| 01/11/2026 | PCN-25-264941 - Material Change. Material change within the MCON 1.2 CleanBody Terminal family. The base material of the existing 0- variants will be changed from CuSn0.15 to CuSn4, resulting in the introduction of new 7- variants. This material change provides improved crimp performance, while maintaining electrical characteristics. There are no geometrical changes, and existing tooling and applicators remain fully compatible. All new versions have been fully qualified in accordance with product specification 108-18782 (including LV214 and USCAR), following TE Connectivity s standard release procedures. A phased introduction is planned, starting with lead customers and lead part numbers in EMIA in early 2026, followed by a global rollout over the subsequent time. TE Connectivity strongly recommends using the new 7-variants for all new designs and future applications, as they represent the preferred and enhanced long-term solution.
| Download |
| 02/20/2024 | P-23-025380 - MOQ & DU Change. To inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. Change was already communicated via P-23-024531 but new PCN informs about postponed activation date: As of February 20, 2024 we will increase the delivery unit & the min. order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. The product in scope of this PCN is TE general sales / catalogue product, therefore TE reserves the right to determine delivery unit & MOQ. No PPAP will be submitted for this PCN. It is kindly requested to adjust order quantities before the activation on February 20, 2024 to avoid blocked orders.
| Download |
| 02/20/2024 | P-23-025381 - MOQ & DU Change. To inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. Change was already communicated via P-23-024531 but new PCN informs about postponed activation date: As of February 20, 2024 we will increase the delivery unit & the min. order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. The product in scope of this PCN is TE general sales / catalogue product, therefore TE reserves the right to determine delivery unit & MOQ. No PPAP will be submitted for this PCN. It is kindly requested to adjust order quantities before the activation on February 20, 2024 to avoid blocked orders.
| Download |
| 07/20/2023 | P-23-024531 - Change to DU & MOQ. change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. As of July 20, 2023 we will increase the delivery unit & the minimum order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. No PPAP will be submitted for this PCN.
| Download |
| 03/29/2023 | P-23-024333 - Product Improvement. Addition of CH values for CFA standard used parts, short-circuit Variant. New variants for CFA standard used parts added PCN Classification: no Form Fit Function Change.
| Download |
| 03/20/2021 | P-20-020088 - Product Improvement. This SCR is a change of transportation mode required upon customer pick-up. Point of Manufacture and Point of Distribution will not change. These products will now be imported by TE from manufacturing region using bonded transportation and distributed from TE Foreign Trade Zones in El Paso, TX and Ontario, CA, USA (distribution point determined at the part level, unchanged). As these products are consumed by customers outside of the United States, TE requests that these parts be received using a bonded carrier and (1) directly exported from the United States, or (2) transferred to customer bonded warehouse or FTZ prior to export from the United States. | Download |
| 01/18/2021 | P-20-020139 - Add 1coding for mass production die. we hereby inform you about add 1coding for mass production die_11-1940222 in Suzhou plant. TE part number is 1452503-1,This die capability only cover Asia-Pacific market currently. EMEA customer do not need to change the China part only keep original EMEA part.
| Download |
| 04/11/2016 | P-16-012580 - UPDATE TO PCN P-16-012528. To ensure a smooth and stable transition from SWDC to EPDC, TE will be delaying the transition from the current Santa Teresa, NM DC (SWDC) to the new El Paso, TX DC (EPDC), originally scheduled to implement February 8th - 15th, is now scheduled to implement April 11th - 15th. This delay will allow extended testing on all SAP systems and procedures to ensure a seamless transition into the new warehouse. As we migrate the product and go-live on the new SAP WM software, it is critical to ensure this testing and training is fully incorporated into the systems and operational processes in the new El Paso warehouse. Based on the revised timing of transition, both Customer Shipments and Supplier Deliveries will continue to process from the Santa Teresa, NM location: Address: 101 Lindbergh, Santa Teresa, NM 88008, DUNS Code: 036967748. See attached Customer Letter. | Download |
| 02/15/2016 | P-16-012528 - Location Change. TE has established a new Distribution Center in El Paso, TX to support our South-West Customers. The transition to El Paso will take place during the weekend of February 13th - 14th. | Download |
| 09/30/2015 | P-15-011644 - Product Improvement. | Download |
